Small Basement Kitchen

Completed Basement Kitchen in Headon Forest, Burlington,ON.
Cabinet Colour: Artesian White (ICI)
Turnaround Time: 4 days
Hinge Work and Pulls: 1/2 day work
Hardware: Richelieu (RONA)

On this particular job, we removed 22 cabinet doors and
sprayed face frames on site, doors in shop and rehung after
7 day cure.

Primer: Akvasurf WB Fill Primer (1 coat 2 mils dft)
Topcoat: Becker Acroma Akvatopp 20 sheen. (4 mils dft)

Client sourced a nice set of decorative pulls at Rona (Richelieu)
and we installed for a nominal fee.

Great thanks to Sandy Breck for the project.

Total Makeover Cost: 1527.00

West Oak Trails Ceiling Spraying

Ceiling Project - West Oak Trails - 4100 sq ft2.
Cost: 4000.00
Product: Sherwin Williams Ultra White Ceiling Finish
Turnaround Time: 1 day
-----------------------------------------------------

One of our paint crew blazed through 4000 sq ft2 of ceiling

in one day (11 rooms) applying three coats to a badly nicotine

stained ceiling.

First coat we shot Zinssers Cover Stain, second and third

coats were SW's Qualikote Ultra Ceiling White An excellent

product for spraying.

Special thanks to Todd Pekin for demonstrating his

speed and agility in spraying 4000 feet of ceiling in

under 3hrs complete - primer and topcoat.

Thanks to Carmela and Peter for the project.

Carmela and Peter will be spending time in West Palm Beach

golfing during the month of March at PGA National and were

the winner's of our Grand Prize Raffle for 2010.

Cabinet Painting Prices

Our cabinet finishing prices vary according to:

1. Cabinet Count - how many ?
2. Amount of Sanding Prep or Filling Required Prior to Hardware Install
3. Repair of Damaged Surfaces - Fillling and Sanding Work ?
4. Special Considerations - Obstacles or Stain Removal Required
Prior to Painting ?
5. Finish/Sheen Level Chosen and Product Vehicle Type
(WB Lacquer or Acrylic ?)
6. Pigmented White and Off White vs NGR Stain Refinishing ?

We have done kitchens as small as
5,10 or 15 cabinets and as large as 65+ !

Cabinet projects require 1 week lead time notice and 1 full week cure
time prior to re-install after spray finishing in shop.

All coatings are applied with conventional spray and custom
air-assisted airless HVLP gun and sprayed at 28-40 psi
for perfect finish and atomization.

We guarantee an excellent finished
look with our HVLP process !

***We DO NOT and will not apply OIL or Melamine Alkyds as they are
substandard products with VOC issues, off-gassing, soft cure thumbprinting
and have a tendency to embrittle and yellow over time causing
chipping and loss of colour due to chalking from sunlight exposure.

Spray fog from oil-based and solvented products
is dangerous and a mess to clean up so we AVOID
using this old technology !

WE NO LONGER APPLY OIL BASE PRODUCTS PERIOD !

Carolina Painting Weather is Perfect !

Acid Staining Project

ColorScapes recent installation of concrete etch and stain project

in Glen Abbey. 25 x 20' stamped concrete patio required

significant etching and cleaning prior to remove salts, bbq

stains and birdcrud - we pressure washed after etching and

were able to stain next day.

Prior concrete surface was boring grey stamped concrete !

Price: $750.00 Completed in Two Days.