Ben Moore Stone Refinish !

Original oak kitchen refinished
in Benjamin Moore Stone.

Hardware by Richelieu.

Great thanks to the Blake Family !

Some Deck Work / Barrette Deco Panels

Some deck rehab work

using the new Barrette plastic

Deco Panels. These add a unique modern and different look as opposed to using the old

Chamfered balustrade pickets. You can also see more of the pool instead of a closed in look with balustrades.

We picked these up at Lowes, cut 2×2  lumber and inserted into a custom 1/4" wide and 3/4" deep routed channel,similar to inserting

a floating cabinet door panel. The trick to cutting these is to keep your table fence rigid and don't move it between cut setups,just like ripping 2.25 cabinet stiles/rails.

The nice thing is these can be removed for winter storage as they are suspended on a key hook hardware mount (Canadian Tire Hardware).

Last Open at the Abbey , DJ Prevails !

Well, for those of you that grew up going to Glen Abbey with our Dads and friends, today is the last hurrah for the course that the Golden Bear
Built. Apparently, he was so disgusted by the announcement to use the land to build  more
McMansions, he refused to appear at the event.

The golf was excellent, the course was in excellent shape, and I know many fans who are sickened by this poor shortsighted decision to sell out to the almighty developer dollar.

The RCGA will regret this decision for the next 100 years. A sad day for Canadian golf fans for sure.

Strip and Refinish

Homeowner tried to use that Polyshades 2 in 1, which never really comes out that great, hence the call to us to strip and refinish by using a dedicated stain and separate clear finish to control color depth and final finish build.

Heirloom to the rescue, some lacquer thinner
and good old fashioned elbow grease !

Original raised panel
double ogee Barzotti
cabinetry, still in excellent
shape 17 yrs later !

Doors stripped and profile
sanded using our Thoroughsand
techniques ;)

Final pics once complete will
be posted.

Humboldt Bronco Hero

Forget our two-faced politicians and business leaders, this kid is a real Canadian
hero. Ryan Straschnitzki donning the sledge
hockey blades and getting on with his life.



https://www.cbc.ca/amp/1.4756620

Painting in Humidity, Exterior Notes

We try to counsel other painters

that exterior painting and refinishing

Can be a little tricky in our current

summer heatwave conditions.

It would be ideal if conditions were

always 72F with humidity below 35%,

and not 88-92F with 60% humidity.

As a general rule, follow the sun so that freshly

applied coatings do not get exposed to the blistering sun and try to make sure all surfaces

are thoroughly sanded and filled.

Also keep in mind that most exterior coatings

are sacrificial in nature and act to protect the

substrate. If left uncoated they will age

prematurely and decay.

Canadian Electrical Code 2018 Changes FYI

Effective as of April 2018, all kitchen
receptacles are required to be on a
dedicated branch line. GFCI outlets
mandatory near sink or wet areas.

Before you could add outlets from
another branch line, this is no longer
the case to meet CSA code.

The other changes are listed
below :

http://www.electricalindustry.ca/latest-news/3739-2018-canadian-electrical-code-part-i-top-15-changes

Harbortowne Hilton Head Cabinetry

Classic and Timeless 

Light Walnut Stained

Raised Panel Cabinetry

at the renowned Harbortowne

Golf Resort at Hilton Head,Sc

Site of the Heritage Classic.

An example of excellence for all of us 

to aspire to...

We did not provide this order but it shows you what is possible within the realm of solid

Maple cabinetry. (NO MDF in South Carolina coastal regions, does not hold up...)

Notice the Locker Bench Shoe Caddy

Cabinets keep floor clutter

to a minimum.

Photos submitted by one of our family 

members....!

Happy Canada Week, our sponsor Black and Decker

Our work would not be possible
Were it not for the quality
woodworking tools from our
sponsor at Black and Decker.!!!

No one makes a touch orbital
sander as good as these guys...

Pick one up at Canadian Tire
During their power tools promos !

Happy Canada Week !!!

Why God is a Maple Leafs Fan !

The arrival of John Tavares, a bona fide No.1 playmaking centreman capable of 100 pts for 7 years. Welcome No.91, could a Stanley Cup be in the near future, ending the 1967 drought ?

Another Refinish Stage N Sell...this weekend Maryvale Ct, Burlington

This weekend another of our refinish assistance projects for the homeowner on Maryvale Ct. Burlington is on display. Listing is on rew.ca and Keller Williams.

Prior cabinets were aged maple but in great condition...OC-17 White Dove...finished in none
other than our go-to waterborne lacquer by AcromaPro.(50 Sheen). We use a Greenguard
GS-11 Rated Enviromentally Compliant Finish which is safe for homeowners to touch up and will not off-gas like a solvented mek cut lacquer.
Solvented finishes yellow early in off-whites and are more prone to interjunction rail and stile
cracking. Trust us, waterborne lacquers have been at the forefront of cabinet refinishing and their benefits far outweigh the use of old school MEK thinned solvented lacquers.

This was our 27th Dove White refinish !
Great thx to Royal City Paints for another
perfect tint !

Prior to countertop install by

Nustone Oakville...laminate replaced by granite topper.! Looks great with high contrast.

Refinished frameless cabinets

Prior to door re-hanging...

Check with the MLS Board for listing details.
Great location, location, location !!! It won't be on the market for long, its a great home.


Once again great thx to Maureen and Peter :)
MLS Listing is  #H4029622.

Hot Summer Cool Deals Promotion

Once again this summer we are offering our
15% off any kitchen refinishing project, staircase refinish or Interior/Exterior Painting project !

Book early and get a Keg Gift Card !

Congratulations to the Toronto Marlies !

Way to go Marlies ! 

Andreas Johnsson was unreal capturing the MVP !

Gotta win at the farm before you can win in the NHL !

Its a process, like everything in life...;)

Ben Moore Stone/Richelieu Sleek Pull

Colour: Ben Moore "Stone"
Finish: Akvatopp 814 50 Sheen 4 coat pass
Hardware: Richelieu Sleek Collection 2018

Great thanks to Lorna and Grant P.!

Kilbride Kitchen in SW7002 Downy

Great refinish for a staging resale in spring
2018...We also added two potlights for a
nominal fee which highlight the white cabinet
profiles, something you never see with dark stained wood/clear conversion varnishes (amino alkyds also yellow early).

Ask us why we love Royal Lepage AboutTowne
Realty...

Call Tim Gerrior if you need assistance
with a listing ! :)

The Richelieu Trends Event June7th Great Ideas

Our recent attendance at the Richelieu trends event has led to some great ideas moving forward:

Horizontal Dual Stacked High Gloss Cabinetry
With gas lifter hinges
Super Modern Stainless and Glass Hardware/Pulls
Accordion Work Space Kitchen/Office Flexwork
Desks
Projector Overhead Cabinetry (Our design!)
( Minimized electrical footprint)

Best Prices in Burlington and Hamilton

We are still offering better pricing than our two main competitors in this market.Why ?

Lets give you the reasons...

Low overhead
Expert 25 year plus coatings application knowledge
Much lower prices than competition
5 year refinish and stage warranty
Reasonable pricing / small operation
References from the RCMP/Law Enforcement and Hamilton Health Sciences employees

the Genius of Nikola Tesla...everything in construction angles is a 9

Did you know that Tesla's theorems of 3,6 and 9 are
astoundingly accurate in all fields of not only
geometry but also construction ?

The Angles of 45 degrees = 4 + 5 = 9
The Angle of 90 degrees is 9+ 0 = 9
Corner Angle Cabinetry is 22.5 , yes 2 + 2 +5=9
the inside crown reverse angle is 135, 1 +3 + 5 = 9
The inside of a hexagon angle is 108 degrees, 1 + 0 + 8 = 9

All construction cutting angles are defaulting to 9...
ALWAYS. For those of you doubting this magnificence
of resulting angles adding up to 9 here is an explanation...

https://www.youtube.com/watch?v=inWnhZp_A-M



The problem ?  If you buy an average built home, there isnt
a straight or perfect 90 degree inside corner to be found  LOL !

Two weeks ago we had to cut 24 degree angles for corner cabinets
on a supposed 45 degree angle....just saying this is what goes on....
As refinish contractors we see all kinds of code violations on homes
where some of the original builder work in a tract survey is just
horrendous. There is a reason the OBC code book is growing by 90 pages
every 5 years...

Anything really easy is really not worth doing, challenge yourself !

Bookings Available in July and August + New Warranty Coverage !

We are still actively booking refinishing and painting
projects for our client base and still provide GIFT
CARDS as thanks for the orders we've had over the
years. Pick your choice of retailer or restaurant !

We have also expanded our warranty coverage for
homeowners who lack the expertise and know how
to fix pet scratched or pot damaged doors. We are
calling it the G69 Warranty Program.

If you damage 6 doors, we'll come do 9 for you
free of charge within your original 5 year coverage
with us. How awesome is that ?

Happy Homeowners with Maximum Resale !

We recently assisted a homeowner
With refinishing both kitchen and bath cabinetry in
Scholars Common Burlington,On.

16 months post finish, the owners received
a fantastic resale value in excess of 700k in less than 3 yrs of cosmetic upgrades !

The upgrades done are what we would call the Magic Five :

1. Refinishing the Kitchen to a Modern Clean White or Off White (shows better, larger, brighter !)
2. Upgrading to hardwood flooring over builder tile or cheapy 8mm floor
3. Eliminating clutter by getting a storage unit - unsightly clutter reduces showing potential
4. Upgraded vanities and bath fixtures
5. Fresh coats of current trend colour paints from Sherwin Williams, Ben Moore or PPG Dulux

Follow the above 5 core processes and you WILL GET MAXIMUM resale potential.
Its really not rocket science, but its difficult to do all of this and work a 50-60hr work week if
you are what we call corporately overemployed - ie. they will fire you if you don't put in
a 7-7 work day and get paid for 45. ! (Thanks Mike Harris)

Clients hire us to do cabinet refinishing and wall painting because they don't have the time, the tools and don't want the dust in their houses. !! You should see the look on their faces when they
make full bank on resale...it's highly rewarding to hear of cases where clients are making in excess of 200-300,000 in equity in 24-26 months. Refinishing a kitchen is just one more cornerstone in the build-up. Take a good look at those cabinet doors and bases, are they tired old grainy dinosaurs ?
                           

The great thing ? Our refinish price was just
under $2200.00 and we gave the client a $250.00 Best Buy Gift card as thanks for the project


We also did valances and mini crown toppers in addition to a custom extended fridge box.

Refinishing is always win-win when staging to
sell your home for maximum resale.!

The job was completed Dec 2016 and is listed in our December archive of projects.

So happy for our repeat clients Tim and Luke !

Anyone for a Snowfield Slate Off -White ?

Now Offering Shipped Cabinet Doors through Shipstation

We like to think that we are vanguard in our approach to servicing the refinished kitchen cabinet market.

Here's our latest offering for clients who
are a half days drive from us (250km or more).

Shipstation !!!

Pickups and deliveries arranged via the Shipstation service hub.

I keep telling those who will listen that we are only 125 years removed from covered wagons, there are thousands of ideas not yet conceived or put into practice yet that will form the foundation for the next 100 years. Driverless cars etc....the economy is rapidly evolving to a service and convenience based one with much less reliance on the Supermall approach of the 1980's.

Why Refinish ? Cover up mismatched joined grain !

Can you spot the mismatched grain 

and unmatched stain sections ?

(Hint, its the last two really bad looking doors on the right upper cabinet section).

Sometimes little deficiencies like this drive homeowners nuts after a while of looking at it.

You'll also notice the base cabinet veneers

are too light and do not look even close to the hardwood maple doors on the uppers.

Another reason to refinish that kitchen,

Hide the faded Early American Stain

and dulled, mismatched grain areas

with a solid opaque waterborne

lacquer.

Generally speaking,stain and UV clears only last 10 years before a refinish is in order.

Condo Kitchen Burlington

Colour: OC-17 Dove White
Finish: AcromaPro W/B Lacquer 50 Sheen
Non-yellowing lacquer.

Client was tired of the cinnamon
Powder Stain 1980s look.
Clients did their own tumbled
Tile from Factory Tile Burlington.

Great thx to Greta and James
Enjoy a night at the Keg on us !

Use the Visualizers to Help Pick Colours...

We've always been big on using the visualizers to select your colours in Preview on either the Sherwin Williams site or ICI/Dulux.

The hot look right now is white cabinetry with kona stained rustic ceiling post accents and sand wall colours...

45 Cabinet Door Kitchen !

45 cabinet door kitchen
finished in SW6133 Muslin
AcromaPro wb lacquer.

Amerock Hardware to
Modernize the look.
Counters by Nustone/Granite
Transformations.

Call DeAngelo for Roof Repairs/ The 2018 Wind Storm

The Friday May 4th (lol) Windstorm with
120km line gusts was something
to experience...roof shingles missing
all over west Burlington and beyond...

My neighbor works for DeAngelo
Roofing and I've seen some of
their great install work in Burlington.
These guys are suddenly extremely busy !!!

I had to thatch repair 11 shingles
yesterday post storm. Anyone need
A spare Cambridge Weatherwood
3 tab shingle ? McGyvering is fun !

Say Yes to that Needed Kitchen Refinishing...

Our clients love stuffing money
into their pockets on a cabinet refinishing
update...we guarantee you'll get an 800%
return or more on aged kitchen finishes brought
back to like factory new !!!

If cabinetry is still in good shape, refinishing with waterborne lacquers
or Non-Grain Raising stains can bring your kitchen back to life.!


Some success stories...resales with kitchen
Refinishing by Colorscapes...

Summerchase 832k sold !
Porter Cres, 650k sold !
Old Post 929k sold !
Hollybrook Cr 557k sold !
Scholars Common 700+k sold !
Northampton Blvd 458k sold !
Sunset Dr 677k sold!
Bridlewood 550k sold!
Brada Cr 622k sold!
Rochelle Dr, 600+ sold !
West Oak Blvd 552k sold...!
Liam Dr 657k sold!
Linke Pl 612k sold!
Greenhurst 727k sold!
Oakglade 785K sold !
Apple Valley Lane  927k sold!!
Upper Paradise 575K sold
Monks Passage 689k sold (2001)
Mountain Park 812k sold!
Drinkwater Lane 854k sold!
Admirals Ct 485k sold! (West Palm Beach)
Avenue of the Masters 844K USD (Sold)
Flagler Dr, Daytona Beach 1.5m USD (Sold)
Colonial Cr and Charnwood Dr. Sold !
Hawkswood Cr 715k sold !
Biggs Ave 899k sold ( 643k prior sale 17 months!)



All of the above had us come do their kitchen
prior to listing....all existing cabinets were in good shape, just needed to be refinished...!
You may find it hard to fathom, but sometimes small improvements can yield a massive
equity gain due to the fact that a refinished kitchen if done properly, looks like a brand
new kitchen ! Don't throw out good quality Maple and Oak doors, they are hard to come
by nowadays with so many kitchencrafters trying to specify cheapy MDF. Save MDF for
laundry room and basements if you have to use it. I can't stand cutting or breathing in the
carcinogenic off-cut dust myself. Did you not know that MDF is manufactured with
formaldehyde resins ? This stuff was cancerous years ago, and it has not changed.

From Oakville to West Palm Beach, we'll help you modernize that dated golden oak or dark cinnamon 80's look.

We originally started refinishing kitchens during a market surge in Glen Abbey in the late 1980's prompted by a NEED to obtain maximum
market resale price for PHH Homequity on a client transfer. The market was full of challenges in this local area (Monastery/Monk's Passage). This set the stage for what we call a SPIN selling moment/case history. Situation: Aged Cabinetry with Small Transfer reno budget by PHH Problem/ Implication: Home would not receive a good or fair offer, if not spruced up.
Needs/Payoff:  A great result was obtained with a strong showing and profitable sale on MLS !

20 year Builder and Factory finishes only last so long on wood cabinetry, don't throw it out, refinish !!! So many Burlington and Oakville kitchens installed in the mid 90's are now dated with aged finishes that have faded from U.V.exposure or hard wear and tear. The kids are older now, doors are not being slammed or banged into as much etc., so it makes sense to refinish those wood doors.

Check out our immersion edge soak video on 2 day cured finishes....you will be amazed !

Bookings on the fly 905-336-2324

Home Theatre Reno with RCA Short Throw and Paradigm Acoustics

It has begun....like every day you make the choice to begin anew....Work hard every day and then at 6pm, leave it all on the field...

Ask about our latest invention for hanging overhead drywall without using a lift or
having to lighten sheets by cutting...forget
about buying a useless drywall lift, they don't
Fit down a finished staircase you idiots...!!
So many products on the market are poorly
designed and yet here we are only 125 years
removed from covered wagons !!!

Client is stoked about watching movies, using his golf simulator and indoor virtual cycling training...

Overhead vapor barrier boxed
Outlets to hide cords for a nice
Clean install. Paradigm Active
Sub paired with Pioneer WiFi
Audio with Bluetooth. Acoustics
will be optimal with a minimal
furnishings approach. See the
Paradigm site for tips on improving
room acoustics.

We had this 24 x 12 room sheeted
in under 6 hours with standard CGC
Ultralight 1/2" Ceiling Sheetrock.
We always go for Level 5 finishing,
Which if anyone who follows drywall
Finishing techniques refers to the process
Of taping, mudding and sanding to the point
Where there are no visible tool ridges or
Raised drywall compound areas. In other words, Use the worklights, use the wet sponges and J-cloths and make sure your skim compound is free of dried and cured mix fragments. No one
Likes "shit in their mix"or so the saying goes.!
We always tape joints with either paper or mesh
To prevent crackout as much as possible.

I've seen a few contractors go absolutely
apeshit when their new box of compound had
dried bits of mud in it. Keep tools clean by washing and sanding off cured taping compound.

Service access panels for any future
Upgrades saves drywall damage
Post-reno. Theres nothing more frustrating than leaving the next homeowner to guess at where
Junction boxes are concealed.

Floor will be 12mm Mannington
Floating laminate (great for basements
as its warmer than ceramic tile.)


Reno should be done in time for the next
Giro D'Italia and of course, The Tour De France.!

Approaching Level 5 Drywall Finishing

Prior to Prime Out....roughly 32 hours work...

Final pics will be posted once finished...

Home Theatre 10' big screen for $200 at Canadian Tire

Anyone interested in a high quality home theatre without a high price tag should grab the new 10' (optimum view distance) foot RCA short throw Home Theatre projector,  it's excellent for the money...130.00 ? Are you kidding me ???

Watch the Jays and Leafs in big screen action on either the screen or properly painted wall.

Only at Canadian Tire....

Can someone find the 2nd period Leafs team in
Game 7 ?...5 years later the TD Garden jinx returns...

Laundry Locker, Carlisle

Our Modern Slab Doors

In easy to clean Sw7002

Downy Akvatopp Wb lacquer

Wall Colour: Intercoastal Dulux

16bb/031

Finish: Emerald Matte SW

Pull outs with Accuride rs3832 Glides

(100 lb rated)

Great thx to Alba V. !

Alba and her husband are endurance cyclists

with an affinity for Colnago VR2 road bikes.

This laundry locker is great for storing your cycling gear after a couple hours hammering on the pedals....

Painting for Wellwood Cancer Support

Around this time last year or thereabouts, we had the opportunity to donate our time and
painting skills to Wellwood Cancer Support
(Part of Hamilton Health Sciences).

Colour chosen was Hc-143 Wythe Blue
from Benjamin Moore, final finish in Ultraspec 500 (Eggshell).

The room painted is the activity yoga room,
A great respite centre and healing zone for those affected by cancer. Donations are important for the cause, please give as we do in honor of those affected.

Great thanks to Jane George and the Wellwood
Team, it meant lot to us to be asked to help out.:)

GCodes, Offset Tolerances and Easy Repeatable Toolpaths

I laughed the other day reading
a Fanuc CNC programming guide when
it did not accurately capture the
need for the following when tracing
cabinet parts outlines:

Offset tolerances need to be at minimum
in the 3/32" range when working with case
sheetgoods, due to shear tear-out and finish
sanding needed post-cut. Anyone programming to the .000 thousandth needs to account for this
variance. Again, you are making parts that need to be hand assembled, prepped, and spray finished. Keep this in mind, maybe two end panels would have been done better by just cutting on a sliding table saw. Think about your workflow before working...it really does pay off !

Toolpaths needed to be thought out in
advance, ie the Atc tooling head needs to
Be told to drill shelf peg holes BEFORE
cutting to dimension the actual part.
Vac tables being what they are, they cannot always hold perfectly and the machining force
of 37mm setback hinge holes is enough to twist and damage the part being skin-cut. I saw this at another cabinetmakers shop and immediately pointed it out. Problem?...solved.

Slow the ipm travel paths to an optimum cut speed, trying to show off your latest Thermwood Cs43 by running it to the envelope just leads to broken pcd bits that cost 565.00 each from Royce. DONT DO IT, it also leads to gantry misalignment over the long term. Stick to speeds below 700 ipm or even less. No one drives their car with the needle buried, why do this to your CNC ? A second toolpath pass to drill or shape in two runs may result in a better finish than causing "chatter" on a cabinet door edge. The old adage, sometimes two small steps together leads to a big step of accomplishment over time.
This can be applied to any wood shaping approach.

This is the best Cnc guide I've learned....
Blows away the shitty Thermwood Manual...
Just sayin'...!

Always test cut your custom g code program on a spoilboard.!!! No one bats .1000 !

Any island or casework wider than 4 feet should be assembled on site, don't trust our shitty Halton roads, the vibration is just unreal at causing shifting and racking misalignment.

Less glue is better, Titebond has a hold force of at least 2000 psi, sanding off sloppy glue from an end panel or frame join may take longer than you think, you can always add more.

Waterborne Lacquers Still the Best...

Ask any cabinet refinisher or new wood cabinetry manufacturer about why they no longer use solvented or post-cat nitrocellulose.

Danger from MEK Solvents
Flash combustible, does not meet Greenguard
Danger to homeowner on touch-up
Early yellowing in conversion finishes
Crack at interpanel seams more noticeable than wb lacquer
Hazardous Airpollutant
Cancer causing benzene and stoddard solvents

Colorscapes uses the same excellent AcromaPro
and Target Coatings waterborne lacquers as the
big conglomerate cabinet companies. NO ONE
IN THEIR RIGHT MIND IS STILL USING CATALYZED POST-CAT, THEY CANNOT EVEN FIND SPRAY TECHS WHO WILL WORK WITH
THAT GARBAGE ! YOU CANNOT REPAIR SOLVENTED FINISHES ON-SITE IT IS TOO DANGEROUS FOR A HOMEOWNER TO CONSIDER.

When in St.Catharines....Another Dove White !

Today we picked up 32 cabinet doors for refinishing in old downtown St. Catharines,
Which of course necessitated a trip to
Beechwood Donuts on St. Paul St.

Check out these Bad Boys....!!! All that's
missing is a nice 10 bar espresso...:)

12 days later....Our 27th
Dove White Refinished
Kitchen with new Box Hood/
Colonial Trim with Broan
Undermount fan by Goemans.

Great thanks to Richelieu
for dropping off just-in-time
hardware in Brushed Nickel
finish.

Great thx to The Bowles for the
Project, enjoy a night out on us
At The Old Stone Inn ;)

This was heard at a job site this week..Lol !

Alexa, please tell Winter to F.O.A.D !!!

Enough of this 2018 Winter already,
It's been ridiculuous to say the least,
mid-April and we are still seeing
Minus temps....unreal...!

Dove White and Black Two-Tone

Just in time for the spring resale market, aged old
golden oak converted to Dove White and Tricorn Black.
Both finishes in AcromaPro WB Lacquer.
What can you say...Sharp Sharp Sharp

All for the low-cost of 1600.00 no tax !

Great thx to the Sootke family !

Great Donuts...Hit the Monster !

The fighter pilots that train at Miramar
And NAS Oceana swear by a couple morning
donuts with black coffee pre-training flights.
Reason being its close to being a perfect complex carb/protein ratio for clear thinking.

If they knew Donut Monster was around they'd be dropping in...

Donutmonster.ca

Narragansett, Rhode Island Here We Come !

Great thanks to Julie Z. for the booking. We will be handcrafting
37 Select Maple 1 Series Windsor Raised Panel Cabinet Doors,
Crown Mould and Custom Rev-A-Shelf, Bluetooth Enabled
and Wifi-Custom Cabinetry in our exclusive custom
BuckingHam Blue.

Doors will feature micro-grommeted gasket hinge dowels
Hettich Soft-Close Hinges and Accuride 2832 Soft Close Glides
All base work and case work will feature our revolutionary
Channel Link Joinery hardware.

Demolition by Bigfoot Demolition Rhode Island.

We will post pictures once complete !

Garmin Virtual Bike Links - Training

As requested by a client, here is the link to the Garmin VIRB
indoor cycling training videos. Add a Chromecast and train
on your 50-65" TV. It's a lot safer than using our pothole-ridden
roads in Halton !

https://www.youtube.com/watch?v=5Gk_rKzb54o

In progress...goodbye Golden Oak ...Hello Modern ...

Great thx to Gary and Shelly !

Another successful refinish in our 

Thoroughsand Shop Process

A nice modern look with dark contrast Amerock Hardware. Samsung Hood by Goeman's installed by homeowners. Tile backsplash to follow.

Valances to follow,using the new Sherwin Williams non-splitting 1050 fast-dry caulking !

Colour: SW7566 Westhighland White

Finish : Target UltraSatin WB Lacquer

Some jobs we default to the better white hiding power of Target Coatings Emtech6500 Series.

Thousands of doors spray finished...

If Uncle Sherwin cares to listen, there is about 5% too much vehicle diluent in the Acromapro off-white (our opinion). Too much burn in affects the integrity of the primer.